Lawn & Garden Equipment Rental

Barreto 1324D Standard Trencher

The Baretto 1324D Standard Trencher is all hydraulic - no belts, no gears, no chains. A low center of gravity provides stability. The control panel is simple and understandable. It features a safety clutch that can engage and disengage the the wheel and chain drives. The variable speed drive allows the operator to adjust the wheel speed to the soil conditions. And the reversible chain drive can be manually operated in order to dislodge obstructions.

Boom tension can be easily adjusted when needed
Quick access to all of the hydraulics for easy maintenance and repair
Simple controls are easy to operate with no color codes to remember
Hydraulic pumps are protected yet accessible
Reversible chain can be manually operated to dislodge debris

18" Sod Cutter

160cc and 5.5HP Honda GX160 Engine.
Easy Handling - Self-propelled technology and maximum traction if offered by the cast iron drive wheels
Vibration is lessened by the vibration dampening handle support springs that reduce vibrations in the handle assembly and 4 elastomeric handle isolators that isolate vibration from the machine before it reaches the handle
Maneuver effortlessly around curved landscape, make tight turns easily, and perform contour cutting with this 9"x3.5" pneumatic rear swiveling caster wheel that offers vibration isolation.
Using the drive wheel lever/engagement you can easily transport this sod cutter without engaging the cutter blade.
Cut up to 2" deep at 20 times per second for consistent cutting and less vibration.

Play 18" Sod Cutter Video

Toro BRC-28 Brush Cutter

Toro's commercial grade, self-propelled brush cutter is ideal for leveling brush, tall weeds, saplings, and heavy vegetation with ease. The Toro BRC-28 Brush Cutter can handle up brush up to 6 feet tall and saplings up to two inches in diameter.

Toro Brush Cutter Specifications

Cutting Width: 28 inch
Cutting Height: 3-3/4 inch
Starter: Electric
Fuel Capacity: 1 Gallon
Weight: 375 lbs

The Toro BRC-28 Brush Cutter features a powerful engine, simple controls, aggressive tread tires, a pivoting deck, a parking break, knuckle guards, and durable rubber deck flaps.

Makita 36V Brushless Earth Auger

18-Volt X2 (36-Volt) LXT Lithium-Ion Brushless Cordless Earth Auger

No gas, emissions, oil mixing or pull starts with reduced maintenance and low noise levels
Makita-built BL™ Brushless Motor delivers power of a 36cc gas earth auger
Drill holes up to 8" wide and 41" deep (extension bar, auger bit and blades sold separately)
High performance digging with even and consistent holes for landscaping, construction and soil sampling
Ideal for post-hole digging, fence installation, large planting jobs and construction projects
2 speed options (Low: 0-350 RPM, High: 0-1,400 RPM) for power and run time management
Automatic Speed Change™ technology adjusts drill speed and torque during drilling
Reverse switch for clearing earth auger bit from high resistance soil
Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds (low speed only)
Metal-gear housing increases tool durability and extends reliability

One Man Auger

One Man Auger Hole Digger, 3 1/4" Auger

Features a 1.3 hp, 4-Stroke all position Honda GX35 engine
Ideal hole digger for a variety of soil applications
Built with oversized ball bearings, heat treated shafts, and machine-cut gears
Precision, spur gear transmission
All metal centrifugal clutch
Comfort-Zone operator handle
Magura twist grip throttle control
Tool weight - 36 lbs

Play One Man Auger Video

Stump Grinder

The Toro Stump Grinder brings simple control and serious power to tree care maintenance. The stump grinder features a control system that is intuitive and easy to operate. The Intelli-Sweep™ cutter head control feature automatically slows the sweep speed of the cutting head based on the load on the wheel, so heavy cutting loads won’t bog down the engine. And, with a powerful Kawasaki® engine, tracks and transport speeds exceeding 4 mph (6.4 km/h), the STX-26 provides ample power with a light footprint for exactly what you need to get in position and get to work quickly.

Track Design

Allows for zero turn capability
Provides a low center of gravity and large footprint
Increased stability on side hills
Eliminates tire ruts and flat tires
Operates in wet & soft ground conditions.

Offset Cutting Head

Provides operator with excellent visibility to stump
Allows full rotation perpendicular to machine

Play Stump Grinder Video

Toro TRX-16 Walk Behind Trencher

Tracks instead of wheels. Simplicity instead of complexity. The TRX trenchers are the first tracked, dedicated walk-behind trenchers that have it all. Tracks - combined with Toro's exclusive easy-to-use control system - provide unparalleled maneuverability, all while offering the ultimate in operational performance.

14.5 hp (10.8 kW) Kawasaki® Twin-Cylinder Engine
Toro exclusive traction control system, similar to Dingo TX and STX stump grinder
Tracks instead of wheels
Easy to maneuver

Track Design

Allows for zero turn capability
Provides a low center of gravity and large footprint
Increased stability on side hills
Eliminates tire ruts and flat tires
Operates in wet & soft ground conditions.

Exlusive Toro TRX Control System: Easy-to-use control system doesn't require jerk-style steering like handle bar trenchers. Three simple controls operate all traction and trenching functions. Simple controls are easy for beginners to learn quickly. Similar to Dingo TX and STX stump grinder.

Play Trencher Video

Toro TRX-250 Walk Behind Trencher

24.5 hp (18.3 kW) @ 3,600 rpm Toro® V-twin engine
New Intelli-Trench™ technology
Groundbreaking maneuverability
Easy-to-use controls